Fail-Safe Chart

WINDOW / GLASS: POWER WINDOW CONTROL SYSTEM: FAIL-SAFE CHART

1. CHECK POWER WINDOW FAIL-SAFE FUNCTION

HINT
* Fail-safe mode has the following modes:
(a) Pulse sensor malfunction (for jam protection detection sensor)
(b) Pulse sensor malfunction (for window position detection sensor)
(c) Pulse direction malfunction
(d) No signal from both pulse sensors
(e) Jam protection position malfunction
(f) ECU malfunction
(g) EEPROM reading malfunction

(a) Power Window Regulator Master Switch Assembly

(1) When a part other than the ECU is malfunctioning:

Power Window Regulator Master Switch Assembly (Driver side window)





[Black Circle]: Operates during fail-safe mode

X: Cannot operate during fail-safe mode

*1: Manual up operates when the switch is held in the auto up position

*2: w/ Occupant Classification System

*3: This function is set through the customize function, as it is off by default.

Power Window Regulator Master Switch Assembly (Front passenger side window)





[Black Circle]: Operates during fail-safe mode

X: Cannot operate during fail-safe mode

*1: w/ Front Passenger Door Auto Up Function

*2: w/ Occupant Classification System

*3: This function is set through the customize function, as it is off by default.

Power Window Regulator Master Switch Assembly (Rear seat windows)





[Black Circle]: Operates during fail-safe mode

X: Cannot operate during fail-safe mode

*1: w/ Occupant Classification System

*2: This function is set through the customize function, as it is off by default.

(2) When the ECU is malfunctioning:

Power Window Regulator Master Switch Assembly (Driver side window)





[Black Circle]: Operates during fail-safe mode

X: Cannot operate during fail-safe mode

*1: Manual up operates when the switch is held in the auto up position

*2: w/ Occupant Classification System

*3: This function is set through the customize function, as it is off by default.

Power Window Regulator Master Switch Assembly (Front passenger side window)





X: Cannot operate during fail-safe mode

*1: w/ Occupant Classification System

*2: This function is set through the customize function, as it is off by default.

Power Window Regulator Master Switch Assembly (Rear seat windows)





X: Cannot operate during fail-safe mode

*1: w/ Occupant Classification System

*2: This function is set through the customize function, as it is off by default.

(b) Power Window Regulator Switch Assembly:

Power Window Regulator Switch Assembly





[Black Circle]: Operates during fail-safe mode

X: Cannot operate during fail-safe mode

*1: Manual up operates when the switch is held in the auto up position

*2: w/ Front Passenger Door Auto Up Function

*3: w/o Front Passenger Door Auto Up Function

*4: w/ Occupant Classification System

*5: This function is set through the customize function, as it is off by default.