Intuitive Parking Assist System

PARK ASSIST / MONITORING: INTUITIVE PARKING ASSIST SYSTEM: CUSTOMIZE PARAMETERS

1. CUSTOMIZE PARAMETERS (Using Techstream)

NOTICE:
* When the customer requests a change in a function, first make sure that the function can be customized.
* Be sure to make a note of the current settings before customizing.
* When troubleshooting a function, first make sure that the function is set to the default setting.

(a) Connect the Techstream to the DLC3.

(b) Turn the engine switch on (IG).

(c) Turn the intuitive parking assist system on.

(d) Turn the Techstream on.

(e) Enter the following menus: Utility / Customize Setting.

(f) Select the setting by referring to the table below.

Warning





Sensor





2. CUSTOMIZE PARAMETERS (On Display and Navigation Module Display)

NOTICE:
* When the customer requests a change in a function, first make sure that the function can be customized.
* Be sure to make a note of the current settings before customizing.
* When troubleshooting a function, first make sure that the function is set to the default setting.

(a) Turn the engine switch on (IG).

(b) Turn the intuitive parking assist system on.

(c) Select the following menus: Setup / Vehicle / LEXUS Park Assist.

(d) Select the setting by referring to the table below.