Removal

FRONT SUSPENSION: FRONT SUSPENSION MEMBER: REMOVAL

1. REMOVE ENGINE WITH TRANSMISSION ASSEMBLY

HINT
Remove the engine with transmission assembly. Removal

2. INSTALL ENGINE HANGERS Removal

3. REMOVE OIL LEVEL DIPSTICK

4. REMOVE OIL LEVEL DIPSTICK GUIDE Removal

5. REMOVE ENGINE UNDER COVER SUB-ASSEMBLY LH Removal

6. REMOVE ENGINE UNDER COVER SUB-ASSEMBLY RH Removal

7. REMOVE NO.1 EXHAUST MANIFOLD HEAT INSULATOR Removal

8. REMOVE NO.2 EXHAUST MANIFOLD HEAT INSULATOR Removal

9. REMOVE FRONT SUSPENSION CROSSMEMBER SUB-ASSEMBLY Removal

10. REMOVE FRONT ENGINE MOUNTING INSULATOR Removal

11. REMOVE FRONT STABILIZER BAR

(a) Remove the 2 nuts and the front stabilizer bar.





HINT
If the ball joint turns together with the nut, use a hexagon wrench (6 mm) to hold the stud bolt.

12. SEPARATE FRONT LOWER SUSPENSION ARM ASSEMBLY LH

(a) Remove the 2 bolts, 2 washers, 2nuts and separate the front lower suspension arm assembly LH.





13. SEPARATE FRONT LOWER SUSPENSION ARM ASSEMBLY RH

HINT
Perform the same procedure as the LH side.

14. REMOVE POWER STEERING LINK ASSEMBLY

(a) Remove the 2 bolts, 2 washers, 2 nuts, and the power steering link assembly from the front suspension crossmember.





HINT
Remove the power steering link assembly together with the front lower suspension arm assembly.