Removal

THEFT DETERRENT / KEYLESS ENTRY: ENTRY LOCK AND UNLOCK SWITCH: REMOVAL

1. PRECAUTION (w/ Navigation System)

NOTICE:
After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the engine switch off, make sure to wait at least 60 seconds before disconnecting the cable from the negative (-) battery terminal.

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

3. REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG Disassembly

4. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver Side) Disassembly

5. REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger Side) Removal

6. REMOVE COURTESY LIGHT ASSEMBLY Disassembly

7. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY Disassembly

8. REMOVE FRONT DOOR INNER GLASS WEATHERSTRIP Disassembly

9. REMOVE FRONT DOOR TRIM COVER Disassembly

10. REMOVE FRONT DOOR SERVICE HOLE COVER Disassembly

11. REMOVE FRONT DOOR OUTSIDE HANDLE COVER (for Driver Side) Disassembly

12. REMOVE FRONT DOOR LOCK CYLINDER ASSEMBLY (for Driver Side) Disassembly

13. REMOVE FRONT DOOR OUTSIDE HANDLE COVER (for Front Passenger Side) Disassembly

14. REMOVE FRONT DOOR OUTSIDE HANDLE ASSEMBLY

(a) Disconnect the connector.





(b) Using a "TORX" socket wrench (T30), loosen the screw.

(c) Remove the front door outside handle assembly as shown in the illustration.