Reassembly

SEAT: REAR SEAT ASSEMBLY: REASSEMBLY

1. INSTALL SEPARATE TYPE REAR SEAT CUSHION COVER RH

(a) Using hog ring pliers, install 7 new hog rings.





NOTICE:
* Be careful not to damage the cover.
* When installing the hog rings, avoid wrinkling the cover.

(b) Using hog ring pliers, install the separate type rear seat cushion cover RH to the separate type rear seat cushion pad sub-assembly with 25 new hog rings.





NOTICE:
* Be careful not to damage the cover.
* When installing the hog rings, avoid wrinkling the cover.

2. INSTALL SEPARATE TYPE REAR SEAT CUSHION COVER LH

(a) Using hog ring pliers, install 7 new hog rings.





NOTICE:
* Be careful not to damage the cover.
* When installing the hog rings, avoid wrinkling the cover.

(b) Using hog ring pliers, install the separate type rear seat cushion cover LH to the separate type rear seat cushion pad sub-assembly with 26 new hog rings.





NOTICE:
* Be careful not to damage the cover.
* When installing the hog rings, avoid wrinkling the cover.

3. INSTALL REAR SEAT UNDER TRAY SUB-ASSEMBLY

(a) Engage the 2 hooks.





(b) Engage the 2 claws and install the rear seat under tray sub-assembly.

4. INSTALL BENCH TYPE REAR SEATBACK COVER

(a) Using hog ring pliers, install 36 new hog rings.





NOTICE:
* Be careful not to damage the cover.
* When installing the hog rings, avoid wrinkling the cover.

(b) Using hog ring pliers, install the bench type rear seatback cover to the bench type rear seatback pad with 44 new hog rings.





NOTICE:
* Be careful not to damage the cover.
* When installing the hog rings, avoid wrinkling the cover.

5. INSTALL REAR SEAT SHOULDER BELT GUIDE RH

(a) Install the rear seat shoulder belt guide RH with the screw (A) and the screws (B).





6. INSTALL REAR SEAT SHOULDER BELT GUIDE LH

(a) Install the rear seat shoulder belt guide LH with the screw (A) and the screws (B).





7. INSTALL REAR SEAT HEADREST SUPPORT

(a) Engage the 8 claws and install the 4 rear seat headrest supports.





8. INSTALL REAR SEAT CENTER ARMREST CUP HOLDER SUB-ASSEMBLY

(a) Engage the 2 hooks.





(b) Attach the 6 fasteners and temporary install the rear seat center armrest cup holder sub-assembly as shown in the illustration.

(c) Install the rear seat center armrest cup holder sub-assembly with the 2 screws.





(d) Cover the rear seat center armrest pad with the rear seat center armrest cover.

(e) Install the the 2 bushes.





(f) Install the 2 bolts.

9. INSTALL REAR SEAT CENTER ARMREST ASSEMBLY

(a) Install the rear seat center armrest assembly with the 2 nuts.