Cylinder Head Assembly: Specifications

Cylinder head

Bank 1:

Bank 2:

Step 1 36 Nm (367 kgf-cm, 27 ft-lbf)
Step 2 90°
Step 3 additional 90°

Standard Warpage





Maximum warpage 0.10 mm (0.00394 in.)

Cylinder head bolt

Minimum outside diameter 10.6 mm (0.417 in.)

If the diameter is less than the minimum, replace the cylinder head bolt.

Camshaft cap

Bank 1:

Bank 2:

1st 10 Nm (102 kgf-cm, 7 ft lb)
2nd 19 Nm (190 kgf-cm, 14 ft lb)

Intake manifold Specifications

Exhaust manifold Specifications

Camshaft gear Specifications