Instrument Panel, Gauges and Warning Indicators: Service Precautions

METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: PRECAUTION

1. REMOVAL AND INSTALLATION OF THE BATTERY TERMINAL

(a) Before performing electrical work, disconnect the cable from the negative (-) battery terminal in order to prevent a short in the system.

(b) When disconnecting and reconnecting the cable, engine switch and lighting switches off and loosen the terminal nut completely. Perform these operations without prying on the terminal.

(c) When the cable is disconnected, the memories of the clock, radio, DTCs, etc. are erased. Before disconnecting the cable from the negative (-) battery terminal, check and make a note of them.