Installation

TIRE PRESSURE MONITORING: TIRE PRESSURE WARNING ANTENNA: INSTALLATION

1. INSTALL FRONT TIRE PRESSURE ANTENNA RH

(a) Connect the connector.

(b) Install the front tire pressure antenna RH with the nut.

Torque : 8.5 Nm (87 kgf-cm, 75 in-lbf)

HINT
Engage the tab into the hole as shown in the illustration to install the front tire pressure antenna RH.

2. INSTALL FRONT FENDER LINER RH

3. INSTALL ENGINE UNDER COVER

4. INSTALL FRONT WHEEL RH

Torque : 103 Nm (1050 kgf-cm, 76 ft-lbf)

5. INSTALL REAR TIRE PRESSURE ANTENNA LH

(a) Install the rear tire pressure antenna LH with the 2 nuts.

Torque : 8.5 Nm (87 kgf-cm, 75 in-lbf)

(b) Install the grommet.

6. INSTALL REAR FENDER LINER LH

7. INSTALL NO. 2 REAR FLOOR HOUSING SHIELD

8. INSTALL REAR WHEEL LH

Torque : 103 Nm (1050 kgf-cm, 76 ft-lbf)

9. INSTALL REAR SEATBACK ASSEMBLY Installation

10. INSTALL REAR SEAT HEADREST ASSEMBLY RH

11. INSTALL REAR SEAT HEADREST ASSEMBLY LH

12. INSTALL REAR SEAT CUSHION ASSEMBLY Installation

13. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

14. INSPECT TIRE PRESSURE WARNING SYSTEM

Test Mode Procedure.