Removal

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: REAR SPEED SENSOR: REMOVAL

HINT
* Use the same procedure for the RH side and LH side.
* The procedure listed below is for the LH side.
* If the sensor rotor needs to be replaced, replace it together with the rear axle hub and bearing assembly.

1. REMOVE REAR WHEEL

2. REMOVE REAR SPEED SENSOR WIRE

(a) Using a screwdriver, disconnect the rear speed sensor wire.





3. REMOVE REAR SPEED SENSOR

(a) Remove the bolt and rear speed sensor.





NOTICE:
Prevent foreign matter from attaching to the sensor tip.