Installation

2UR-GSE FUEL: FUEL SENDER GAUGE ASSEMBLY: INSTALLATION

1. INSTALL FUEL SENDER GAUGE ASSEMBLY

(a) Install the fuel sender gauge assembly by sliding it downward.





NOTICE:
Do not damage the wire harness.

(b) Connect the connector of the fuel sender gauge assembly.

NOTICE:
Make sure that the fuel sender gauge arm does not bend.

2. INSTALL FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY Installation

3. INSTALL FUEL SENDER GAUGE Installation

4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

5. INSPECT FOR FUEL LEAK Fuel System

6. INSTALL REAR FLOOR SERVICE HOLE COVER Installation

7. INSTALL NO. 2 REAR FLOOR SERVICE HOLE COVER Installation

8. INSTALL NO. 3 ROOM PARTITION PAD Installation

9. INSTALL REAR SEAT CUSHION ASSEMBLY Installation