Removal

2UR-GSE FUEL: FUEL SENDER GAUGE ASSEMBLY: REMOVAL

1. DISCHARGE FUEL SYSTEM PRESSURE

(a) Discharge fuel system pressure Service Precautions.

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

3. REMOVE REAR SEAT CUSHION ASSEMBLY Removal

4. REMOVE NO. 3 ROOM PARTITION PAD Removal

5. REMOVE REAR FLOOR SERVICE HOLE COVER Removal

6. REMOVE NO. 2 REAR FLOOR SERVICE HOLE COVER Removal

7. REMOVE FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY Removal

8. REMOVE FUEL SENDER GAUGE Removal

9. REMOVE FUEL SENDER GAUGE ASSEMBLY

(a) Disconnect the fuel sender gauge assembly connector from the fuel suction plate.





(b) Press down on the fuel sender gauge assembly claw labeled A. Then slide the fuel sender gauge assembly upward.

NOTICE:
Do not touch the sender resistance plate or contact area.