Removal

AA80E AUTOMATIC TRANSMISSION / TRANSAXLE: PARK / NEUTRAL POSITION SWITCH: REMOVAL

1. REMOVE NO. 2 FLOOR UNDER COVER Removal

2. REMOVE NO. 1 FLOOR UNDER COVER Removal

3. REMOVE TAIL EXHAUST PIPE ASSEMBLY Removal

4. REMOVE REAR NO. 1 FLOOR PANEL BRACE Removal

5. REMOVE FRONT CENTER FLOOR BRACE Removal

6. DISCONNECT HEATED OXYGEN SENSOR Removal

7. REMOVE FRONT EXHAUST PIPE ASSEMBLY Removal

8. REMOVE FRONT NO. 1 FLOOR HEAT INSULATOR Removal

9. REMOVE OUTSIDE AIR GUIDE PLATE RH Removal

10. REMOVE PROPELLER SHAFT WITH CENTER BEARING ASSEMBLY Removal

11. REMOVE NO. 2 ENGINE UNDER COVER

12. REMOVE ENGINE UNDER COVER AIR GUIDE BRACKET Removal

13. DISCONNECT FLOOR SHIFT GEAR SHIFTING ROD SUB-ASSEMBLY

(a) Remove the nut and disconnect the floor shift gear shifting rod.

14. SUPPORT AUTOMATIC TRANSMISSION ASSEMBLY

(a) Support the automatic transmission assembly with a transmission jack.

15. DISCONNECT REAR ENGINE MOUNTING MEMBER

(a) Remove the 4 bolts, and disconnect the engine rear mounting member from the body.

16. REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY

(a) Tilt down the automatic transmission assembly.

(b) Disconnect the switch connector.

(d) Using a screwdriver, pry off the lock washer.

(e) Remove the lock nut and lock washer.

(f) Remove the bolt and switch.