Removal

2UR-GSE STARTING: ENGINE SWITCH: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY Removal

3. REMOVE UPPER NO. 1 CONSOLE PANEL GARNISH Removal

4. REMOVE UPPER NO. 2 CONSOLE PANEL GARNISH Removal

5. REMOVE CONSOLE PANEL SUB-ASSEMBLY Removal

6. REMOVE INSTRUMENT PANEL BOX ASSEMBLY (w/o Ashtray) Removal

7. REMOVE FRONT ASH RECEPTACLE BOX SUB-ASSEMBLY (w/ Ashtray) Removal

8. REMOVE REAR ASH RECEPTACLE ASSEMBLY (w/ Ashtray) Removal

9. REMOVE CONSOLE BOX REGISTER ASSEMBLY (w/o Ashtray) Removal

10. REMOVE CONSOLE BOX REGISTER ASSEMBLY (w/ Ashtray) Removal

11. REMOVE CONSOLE BOX Removal

12. REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY Removal

13. REMOVE CENTER LOWER INSTRUMENT CLUSTER FINISH PANEL Removal

14. REMOVE DISPLAY AND NAVIGATION MODULE DISPLAY WITH RADIO RECEIVER ASSEMBLY (w/ Navigation System) Removal

15. REMOVE INTEGRATION CONTROL PANEL WITH RADIO RECEIVER ASSEMBLY (w/o Navigation System) Removal

16. REMOVE ENGINE SWITCH

(a) Disconnect the switch connector.





(b) Detach the 2 claws and remove the switch.