Installation

STEERING COLUMN: TILT AND TELESCOPIC MANUAL SWITCH: INSTALLATION

1. INSTALL TILT AND TELESCOPIC SWITCH

(a) Engage the claw to install the tilt and telescopic switch.





(b) Connect the connector.

2. INSTALL LOWER STEERING COLUMN COVER

(a) Engage the 2 claws to install the lower steering column cover.





NOTICE:
Do not damage the tilt and telescopic switch.

(b) Install the 3 screws.

Torque : 2.0 Nm (20 kgf-cm, 18 in-lbf)

3. ADJUST SPIRAL CABLE Installation

4. INSTALL STEERING WHEEL ASSEMBLY Installation

5. INSPECT STEERING WHEEL CENTER POINT

6. INSTALL STEERING PAD Installation

7. INSTALL LOWER NO. 3 STEERING WHEEL COVER Installation

8. INSTALL LOWER NO. 2 STEERING WHEEL COVER Installation

9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL Installation

10. INSPECT STEERING PAD Installation

11. INSPECT SRS WARNING LIGHT

Diagnosis System.