Disc Player Controller Power Source Circuit

AUDIO / VISUAL: REAR SEAT ENTERTAINMENT SYSTEM: Disc Player Controller Power Source Circuit
- Disc Player Controller Power Source Circuit

DESCRIPTION

This circuit provides power to the disc player.

WIRING DIAGRAM

INSPECTION PROCEDURE

NOTICE:
Inspect the fuse for circuits related to this system before performing the following inspection procedure.

PROCEDURE

1. CHECK VEHICLE TYPE

(a) Check the vehicle type.

Result

B -- CHECK HARNESS AND CONNECTOR (DISC PLAYER - BATTERY AND BODY GROUND)
A -- Continue to next step.

2. CHECK HARNESS AND CONNECTOR (REAR CONSOLE BOX - BATTERY AND BODY GROUND)

(a) Disconnect the R16 rear seat console box assembly connector.

(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Text in Illustration

NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.

3. INSPECT REAR SEAT CONSOLE BOX ASSEMBLY

(a) Remove the rear seat console box assembly Removal.

(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

NG -- REPLACE REAR SEAT CONSOLE BOX ASSEMBLY Removal

OK -- PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Problem Symptoms Table

4. CHECK HARNESS AND CONNECTOR (DISC PLAYER - BATTERY AND BODY GROUND)

(a) Disconnect the R64 disc player assembly connector.

(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Text in Illustration

NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR

OK -- PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Problem Symptoms Table