Reassembly

INSTRUMENT PANEL: INSTRUMENT PANEL SAFETY PAD: REASSEMBLY

HINT
A bolt without a torque specification is shown in the standard bolt chart Standard Bolt - Specified Torque For Standard Bolts.

1. INSTALL AUTOMATIC LIGHT CONTROL SENSOR





(a) Attach the 2 claws to install the automatic light control sensor.

2. INSTALL NO. 1 DEFROSTER NOZZLE GARNISH





(a) Attach the 6 claws to install the No. 1 defroster nozzle garnish.

3. INSTALL NO. 2 DEFROSTER NOZZLE GARNISH





(a) Attach the 6 claws to install the No. 2 defroster nozzle garnish.

4. INSTALL NO. 1 METER HOOD RETAINER





(a) Install the 2 No. 1 meter hood retainers with the 2 screws.

5. INSTALL NO. 2 INSTRUMENT PANEL WIRE





(a) Attach the 4 clamps to install the No. 2 instrument panel wire.

(b) Connect the connector.

6. INSTALL NAVIGATION ANTENNA ASSEMBLY (for DVD) Installation

7. INSTALL NAVIGATION ANTENNA ASSEMBLY (for HDD) Installation

8. INSTALL TIRE PRESSURE WARNING ECU





(a) Install the tire pressure warning ECU with the bolt.

9. INSTALL NO. 2 HEATER TO REGISTER DUCT





(a) Install the No. 2 heater to register duct with the 2 screws.

10. INSTALL FRONT PASSENGER AIRBAG ASSEMBLY Installation

11. INSTALL NO. 3 HEATER TO REGISTER DUCT





(a) Install the No. 3 heater to register duct with the 3 screws.

12. INSTALL NO. 1 HEATER TO REGISTER DUCT





(a) Install the No. 1 heater to register duct with the 3 screws.

13. INSTALL NO. 1 INSTRUMENT PANEL PIN





(a) Install the 2 No. 1 instrument panel pins with the 2 screws.

14. INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT





(a) Attach the claw to install the No. 2 side defroster nozzle duct.

(b) Install the screw.

15. INSTALL DEFROSTER NOZZLE ASSEMBLY





(a) Install the defroster nozzle with the 3 screws.

16. INSTALL NO. 1 SIDE DEFROSTER NOZZLE DUCT





(a) Attach the claw to install the No. 1 side defroster nozzle duct.

(b) Install the screw.

17. INSTALL ENGINE SWITCH





(a) Attach the 2 claws to install the engine switch.