Removal

LIGHTING: ROOM LIGHT ASSEMBLY (for Front): REMOVAL

1. REMOVE COWL TOP VENTILATOR LOUVER RH Removal

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

NOTICE:
* w/ Navigation System (for HDD):
After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the engine switch off, be sure to wait for the time specified in the following table before disconnecting the cable from the negative (-) battery terminal.

Waiting Time before Disconnecting Cable from Negative (-) Battery Terminal:





* When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

3. REMOVE MAP LIGHT ASSEMBLY

(a) Using a screwdriver, detach the 2 claws and 2 covers.





HINT
Tape the screwdriver tip before use.

(b) Remove the 2 screws.





(c) Using a moulding remover, detach the 2 clips.





(d) Disconnect the connectors and remove the map light.