Installation

1UR-FSE ENGINE MECHANICAL: DRIVE BELT: INSTALLATION

1. INSTALL V-RIBBED BELT

(a) Install the V-ribbed belt as shown in the illustration.





NOTICE:
Check that the V-ribbed belt is properly set to each pulley.

(1) Rotate the tensioner pulley counterclockwise, and then remove the fix bar.

2. INSTALL INTAKE AIR CONNECTOR PIPE Installation

3. INSTALL NO. 1 AIR CLEANER INLET Installation

4. INSTALL AIR CLEANER INLET COVER SUB-ASSEMBLY Installation

5. INSTALL V-BANK COVER SUB-ASSEMBLY Installation