Removal

1UR-FSE ENGINE MECHANICAL: DRIVE BELT: REMOVAL

1. REMOVE V-BANK COVER SUB-ASSEMBLY Removal

2. REMOVE AIR CLEANER INLET COVER SUB-ASSEMBLY Removal

3. REMOVE NO. 1 AIR CLEANER INLET Removal

4. REMOVE INTAKE AIR CONNECTOR PIPE Removal

5. REMOVE V-RIBBED BELT

(a) Rotate the tensioner pulley counterclockwise to loosen the belt tension.





HINT
The pulley bolt for the belt tensioner has a left-handed thread.

(1) While turning the belt tensioner counterclockwise, align the holes. Insert a bar of dia 5 mm (0.197 in.) into the holes to fix the belt tensioner in place.





(b) Remove the V-ribbed belt.