Removal

POWER STEERING: DC / DC CONVERTER: REMOVAL

1. REMOVE COWL TOP VENTILATOR LOUVER RH Removal

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

NOTICE:
* w/ Navigation System (for HDD):
After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the engine switch off, be sure to wait for the time specified in the following table before disconnecting the cable from the negative (-) battery terminal.

Waiting Time before Disconnecting Cable from Negative (-) Battery Terminal:





* When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

3. REMOVE BATTERY

(a) Disconnect the positive (+) battery cable from the battery terminal.

(b) Remove the 2 nuts and battery clamp.

(c) Remove the battery insulator.

(d) Remove the battery.

4. REMOVE BATTERY TRAY

(a) Remove the 3 bolts and battery tray.

5. REMOVE DC-DC CONVERTER

(a) Release the locks of the 2 converter assembly connectors A and B, and disconnect the connectors.





(b) Remove the 3 bolts and converter.