Reassembly

INSTRUMENT PANEL: INSTRUMENT PANEL SAFETY PAD: REASSEMBLY

HINT
A bolt without a torque specification is shown in the standard bolt chart Standard Bolt - Specified Torque For Standard Bolts.

1. INSTALL AUTOMATIC LIGHT CONTROL SENSOR





(a) Attach the 2 claws to install the automatic light control sensor.

2. INSTALL NO. 1 DEFROSTER NOZZLE GARNISH





(a) Attach the 6 claws to install the No. 1 defroster nozzle garnish.

3. INSTALL NO. 2 DEFROSTER NOZZLE GARNISH





(a) Attach the 6 claws to install the No. 2 defroster nozzle garnish.

4. INSTALL NO. 1 METER HOOD RETAINER





(a) Install the 2 No. 1 meter hood retainers with the 2 screws.

5. INSTALL NO. 2 INSTRUMENT PANEL WIRE (for Leather Covered Type)





(a) Attach the 5 clamps to install the No. 2 instrument panel wire.

(b) Connect the connector.

6. INSTALL NO. 2 INSTRUMENT PANEL WIRE





(a) Attach the 4 clamps to install the No. 2 instrument panel wire.

(b) Connect the connector.

7. INSTALL NAVIGATION ANTENNA ASSEMBLY (w/ Navigation System for DVD) Installation

8. INSTALL NAVIGATION ANTENNA ASSEMBLY (w/ Navigation System for HDD) Installation

9. INSTALL TIRE PRESSURE WARNING ECU





(a) Install the tire pressure warning ECU with the bolt.

10. INSTALL NO. 2 HEATER TO REGISTER DUCT





(a) Install the No. 2 heater to register duct with the 2 screws.

11. INSTALL FRONT PASSENGER AIRBAG ASSEMBLY Installation

12. INSTALL NO. 3 HEATER TO REGISTER DUCT





(a) Install the No. 3 heater to register duct with the 3 screws.

13. INSTALL NO. 1 HEATER TO REGISTER DUCT





(a) Install the No. 1 heater to register duct with the 3 screws.

14. INSTALL NO. 1 INSTRUMENT PANEL PIN





(a) Install the 2 No. 1 instrument panel pins with the 2 screws.

15. INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT





(a) Attach the claw to install the No. 2 side defroster nozzle duct.

(b) Install the screw.

16. INSTALL DEFROSTER NOZZLE ASSEMBLY





(a) Install the defroster nozzle with the 3 screws.

17. INSTALL NO. 1 SIDE DEFROSTER NOZZLE DUCT





(a) Attach the claw to install the No. 1 side defroster nozzle duct.

(b) Install the screw.

18. INSTALL POWER SWITCH





(a) Attach the 2 claws to install the power switch.