Installation

LIGHTING: HEADLIGHT DIMMER SWITCH: INSTALLATION

1. INSTALL HEADLIGHT DIMMER SWITCH

(a) Insert the headlight dimmer switch into the steering column making sure that the stopper's protrusions and cutout parts align.





(b) Install the headlight dimmer switch with the band clamp and claw.





2. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY

(a) Attach the claw and install the windshield wiper switch.





(b) Connect the connectors.

3. INSTALL STEERING COLUMN COVER (w/ Driver Monitor Camera) Installation

4. INSTALL STEERING COLUMN COVER (w/o Driver Monitor Camera) Installation

5. INSPECT SPIRAL CABLE SUB- ASSEMBLY Testing and Inspection

6. INSTALL STEERING WHEEL ASSEMBLY Installation

7. INSPECT STEERING WHEEL CENTER POINT

8. INSPECT STEERING PAD Installation

9. INSTALL STEERING WHEEL PAD Installation

10. INSTALL NO. 2 STEERING WHEEL COVER LOWER Installation

11. INSTALL SWITCH AND VOLUME CASE Installation

12. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
* Reset the AUTO TILT AWAY function setting to the previous condition by changing the customize parameter Programming and Relearning.
* When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

13. INSTALL BATTERY SERVICE HOLE COVER LH Installation

14. INSTALL DECK TRIM SIDE BOARD LH (w/o Spare Tire) Installation

15. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY Installation

16. CHECK SRS WARNING LIGHT

(a) Check the SRS warning light Diagnosis System.