Part 3

CAN COMMUNICATION: CAN COMMUNICATION SYSTEM: TERMINALS OF ECU

37. CHECK COMBINATION SWITCH





(a) Disconnect the L25 switch connector.

(b) Measure the resistance according to the value(s) in the table below.





38. CHECK POWER TRUNK LID CONTROL ECU

HINT
For vehicle with power trunk lid system only.





(a) Disconnect the S43 ECU connector.

(b) Measure the resistance according to the value(s) in the table below.





39. CHECK REAR JUNCTION BLOCK ECU (LUGGAGE ROOM JUNCTION BLOCK)





(a) Disconnect the S62 ECU connector.

(b) Disconnect the LA and LD junction block connectors.

(c) Measure the resistance according to the value(s) in the table below.





40. CHECK TIRE PRESSURE WARNING ECU





(a) Disconnect the L89 connector.

(b) Measure the resistance according to the value(s) in the table below.





41. CHECK FRONT MILLIMETER WAVE RADAR SENSOR

HINT
For vehicle with dynamic radar cruise control system or pre-collision system only.





(a) Disconnect the B9 sensor connector.

(b) Measure the resistance according to the value(s) in the table below.





42. CHECK OBJECT RECOGNITION ECU

HINT
For vehicle with driver monitor camera only.





(a) Disconnect the p1 ECU connector.

(b) Measure the resistance according to the value(s) in the table below.





43. CHECK DRIVER MONITOR ECU

HINT
For vehicle with driver monitor camera only.





(a) Disconnect the L18 ECU connector.

(b) Measure the resistance according to the value(s) in the table below.