Installation

PARK ASSIST / MONITORING: PARKING ASSIST ECU: INSTALLATION

HINT
A bolt without a torque specification is shown in the standard bolt chart Standard Bolt - Specified Torque For Standard Bolts.

1. INSTALL PARKING ASSIST ECU

(a) Install the parking assist ECU to the bracket with the nut and bolt.

NOTICE:
* Avoid any impact to the parking assist ECU.
* Do not drop the ECU. If it is dropped, replace it with a new one.

(b) Install the parking assist ECU with bracket with the nut and bolt.

2. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY Installation

3. INSTALL NO. 2 INSTRUMENT CLUSTER MOULDING Installation

4. INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY Installation

5. INSTALL LOWER INSTRUMENT PANEL Installation

6. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation

7. INSTALL INSTRUMENT SIDE PANEL RH Installation

8. INSTALL INSTRUMENT PANEL FINISH PANEL END RH

(a) Attach the 8 clips and claw to install the instrument panel finish panel end.

9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

10. INSTALL BATTERY SERVICE HOLE COVER LH Installation

11. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY Installation