Installation

PRE-COLLISION: SEAT BELT CONTROL ECU: INSTALLATION

1. INSTALL SEAT BELT CONTROL ECU





(a) Install the ECU with the 2 nuts.

Torque : 5.5 Nm (56 kgf-cm, 49 in-lbf)

(b) Connect the 2 ECU connectors.

2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

3. INSTALL BATTERY SERVICE HOLE COVER LH Installation

4. INSTALL DECK TRIM SIDE BOARD LH (w/o Spare Tire) Installation

5. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY Installation