Crankshaft Main Bearing

Main bearing cap





Step 1

Inside position 61 Nm (622 kgf-cm, 45 ft-lbf)
Outside position 27 Nm (275 kgf-cm, 20 ft-lbf)

Step 2 90°





Torque 45 Nm (459 kgf-cm, 33 ft-lbf)

Standard oil clearance





Maximum oil clearance





There are 6 sizes of standard bearings. For No. 1 and No. 5 position bearings, use bearings marked 4, 5, 6, 7, 8 and 9. For other position bearings, use bearing marked 3, 4, 5, 6, 7 and 8.

Example

Cylinder block "07" + Crankshaft "06" = Total number 13 (Use upper bearing "6" and lower bearing "7")

A = Cylinder block number mark

B = Crankshaft number mark

Standard crankshaft main journal diameter





Standard bearing center wall thickness No. 1 and No. 5 journal





Standard bearing center wall thickness other journal