Installation

STEERING COLUMN: HEATED STEERING WHEEL CONTROLLER: INSTALLATION

1. INSTALL HEATED STEERING WHEEL CONTROLLER





(a) Install the controller with the 2 screws.

(b) Connect the 2 connectors.

2. INSTALL STEERING PAD ASSEMBLY Installation

3. INSTALL LOWER NO. 2 STEERING WHEEL COVER Installation

4. INSTALL SWITCH AND VOLUME CASE Installation

5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

6. INSTALL BATTERY SERVICE HOLE COVER LH Installation

7. INSTALL DECK TRIM SIDE BOARD LH (w/o Spare Tire) Installation

8. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY Installation

9. INSPECT SRS WARNING LIGHT

Diagnosis System