Part 1

LF1A TRANSFER: TRANSFER ASSEMBLY: REASSEMBLY

1. INSTALL TRANSFER FRONT DRIVE GEAR CYLINDRICAL ROLLER BEARING (for Rear Transfer Case Side)





Using SST and a press, install a new bearing to the rear transfer case.

SST : 09950-60020

09951-00710

SST : 09950-70010

09951-07100





Using needle-nose pliers, install the snap ring to the rear transfer case.

2. INSTALL TRANSFER FRONT DRIVE GEAR BEARING





Install the bearing and bearing race to the front transfer case.

3. INSTALL TRANSFER FRONT DRIVE GEAR CYLINDRICAL ROLLER BEARING (for Front Transfer Case Side)





Using SST and a press, install a new bearing (outer race) to the front transfer case.

SST : 09527-17011

SST : 09951-01000

SST : 09950-70010

09951-07150

4. INSTALL TRANSFER FRONT CASE OIL SEAL





Using SST and a hammer, install a new oil seal to the front transfer case.

SST : 09223-15020

Standard depth:

1.0 to 1.5 mm (0.0394 to 0.0591 in.)

NOTICE:
* Do not tap in the oil seal at an angle.
* Do not tap in the oil seal excessively.

(a) Coat the lip of the outer shaft lever oil seal with MP grease.

5. INSTALL TRANSFER OUTPUT SHAFT COMPANION FLANGE OIL SEAL





Using SST and a hammer, install a new oil seal to the front transfer case.

SST : 09316-60011

09316-00011

Standard depth:

2.5 to 3.0 mm (0.0984 to 0.118 in.)

NOTICE:
* Do not tap in the oil seal at an angle.
* Do not tap in the oil seal excessively.

(a) Coat the lip of the outer shaft lever oil seal with MP grease.