Removal

NAVIGATION / MULTI INFO DISPLAY: NAVIGATION RECEIVER: REMOVAL

1. PRECAUTION

Navigation System (For HDD)

NOTICE:
* After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work Service Precautions.
* A hard disk drive (HDD) is built into the display and navigation module display to store map and other data and is used for the navigation system. Therefore, make sure to read all of the precautions thoroughly before handling the display and navigation module display.

2. REMOVE REAR NO. 2 FLOOR BOARD Removal

3. REMOVE REAR DECK FLOOR BOX Removal

4. REMOVE REAR NO. 3 FLOOR BOARD Removal

5. REMOVE DECK FLOOR BOX RH Removal

6. REMOVE REAR FLOOR BOARD UPPER NO. 3 PLATE Removal

7. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

8. REMOVE NO. 3 INSTRUMENT CLUSTER FINISH PANEL GARNISH (for Metal Finish Panel and Urethane Panel) Removal

9. REMOVE NO. 3 INSTRUMENT CLUSTER FINISH PANEL GARNISH (for Wood Panel and Bamboo Panel) Removal

10. REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL Removal

11. REMOVE UPPER NO. 2 CONSOLE PANEL GARNISH Removal

12. REMOVE UPPER NO. 1 CONSOLE PANEL GARNISH Removal

13. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY Removal

14. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY Removal

15. REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY Removal

16. REMOVE AIR CONDITIONING CONTROL ASSEMBLY Removal

17. REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET Removal

18. REMOVE DISPLAY AND NAVIGATION MODULE DISPLAY ASSEMBLY WITH BRACKET

(a) Remove the 4 bolts.





(b) Disconnect each connector and remove the display and navigation module display assembly with bracket.

19. REMOVE HARD DISK DRIVE (w/ Navigation System for HDD) Removal

20. REMOVE DISC PLAYER BRACKET

(a) Remove the 3 bolts and disc player bracket.





21. REMOVE NO. 2 DISC PLAYER BRACKET

(a) Remove the 3 bolts and No. 2 disc player bracket.





22. REMOVE NAVIGATION COMPUTER SUB-ASSEMBLY (w/ Navigation System for HDD)

23. REMOVE DISPLAY AND NAVIGATION MODULE DISPLAY (w/ Navigation System for DVD)