Reassembly

INTERIOR PANELS / TRIM: UPPER INSTRUMENT PANEL: REASSEMBLY

1. INSTALL INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY Installation

2. INSTALL NO. 2 INSTRUMENT PANEL WIRE

(a) Engage each clamp to install the No. 2 instrument panel wire.





3. INSTALL NAVIGATION ANTENNA ASSEMBLY (w/ Navigation System) Installation

4. INSTALL DEFROSTER NOZZLE ASSEMBLY

(a) Install the defroster nozzle assembly with the 3 screws [B].





5. INSTALL NO. 1 HEATER TO REGISTER DUCT SUB-ASSEMBLY

(a) Engage the claw.





(b) Install the No. 1 heater to register duct sub-assembly with the 3 screws [B].

6. INSTALL NO. 3 HEATER TO REGISTER DUCT SUB-ASSEMBLY

HINT
Use the same procedure described for the No. 1 heater to register duct sub-assembly.

7. INSTALL NO. 1 DEFROSTER NOZZLE GARNISH

(a) Engage the 16 claws to install the No. 1 defroster nozzle garnish.





8. INSTALL AUTOMATIC LIGHT CONTROL SENSOR Installation