Removal

THEFT DETERRENT / KEYLESS ENTRY: ELECTRICAL KEY OSCILLATOR (for Front Floor): REMOVAL

1. REMOVE REAR CONSOLE BOX ASSEMBLY

Removal

2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY Removal

3. REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY Removal

4. REMOVE CONSOLE BOX INSERT Removal

5. REMOVE CONSOLE BOX LH Removal

6. REMOVE NO. 1 ELECTRICAL KEY OSCILLATOR (NO. 1 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY)

(a) Disconnect the connector.





(b) Disengage the clamp and remove the No. 1 electrical key oscillator (No. 1 indoor electrical key antenna assembly).

NOTICE:
Be careful when removing the electrical key oscillator (indoor electrical key antenna assembly). If the oscillator (antenna) is dropped, replace it with a new one.