Disassembly

SLIDING ROOF / CONVERTIBLE: SLIDING ROOF HOUSING: DISASSEMBLY

1. REMOVE SLIDING ROOF DRIVE GEAR ASSEMBLY

(a) Remove the 2 bolts and sliding roof drive gear assembly.

NOTICE:
To prevent the sliding roof glass and sliding roof drive gear from being displaced, fully close the sliding roof glass (sliding roof drive cable), and then remove the sliding roof drive gear.





2. REMOVE SUNSHADE TRIM SUB-ASSEMBLY

(a) Remove the screw and sliding roof piece sub-assembly LH.





HINT
Use the same procedure for the RH side and LH side.

(b) Slide and remove the sunshade trim sub-assembly from the sliding roof housing sub-assembly.