Disassembly

SEAT: REAR SEAT ASSEMBLY: DISASSEMBLY

1. REMOVE BENCH TYPE REAR SEAT CUSHION COVER

(a) Remove the 21 hog rings.

(b) Remove the 22 hog rings.

2. REMOVE REAR SEATBACK LOCK STRIKER COVER RH

(a) Disengage the 2 guides and claw, and remove the rear seatback lock striker cover RH.

3. REMOVE REAR SEATBACK LOCK CONTROL LEVER BASE RH

(a) Remove the screw.

(b) Disengage the 5 claws and remove the rear seatback lock control lever base RH.

4. REMOVE SEAT BELT ANCHOR COVER CAP

(a) Disengage the 2 claws and remove the seat belt anchor cover cap.

5. REMOVE REAR SEAT SHOULDER BELT COVER

(a) Disengage the 4 claws and remove the rear seat shoulder belt cover.

6. REMOVE REAR SEATBACK COVER RH

(a) Disengage the 4 claws and remove the rear seatback cover RH.

HINT
Use the same procedure for the RH side and LH side.

7. REMOVE SEPARATE TYPE REAR SEATBACK COVER WITH PAD RH

(a) Using a clip remover, remove the 3 clips.

NOTICE:
The clips must not be reused.

(b) Using a clip remover, disengage the 9 clips.

NOTICE:
The clips must not be reused.

(c) Remove the 9 clips from the separate type rear seatback cover RH.

NOTICE:
The clips must not be reused.

(d) Disengage the 10 hooks.

(e) Disengage the 4 hooks.

(f) Detach the 6 pieces of double-sided tape.

Text in Illustration

(g) Disengage the 4 claws and remove the 2 rear seat headrest supports.

(h) Disengage the 4 claws and remove the 2 rear seat center headrest supports.

(i) Remove the separate type rear seatback cover with pad RH from the rear seatback frame sub-assembly RH.

8. REMOVE SEPARATE TYPE REAR SEATBACK COVER RH

(a) Disengage the 2 hooks.

(b) Remove the 9 hog rings and separate type rear seatback cover RH.

9. REMOVE REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY RH

(a) Remove the 2 screws.

(b) Disengage the guide.

(c) Pull out the rod of the rear seatback lock assembly as shown in the illustration, and then remove the rear seat lock control lever RH

10. REMOVE REAR SEATBACK EDGE PROTECTOR

(a) Detach the 6 pieces of double-sided tape and remove the rear seatback edge protector.

Text in Illustration

11. REMOVE REAR CENTER SEAT OUTER BELT ASSEMBLY Removal

12. REMOVE REAR SEATBACK LOCK ASSEMBLY RH

(a) Remove the 2 bolts and the rear seatback lock assembly RH.

13. REMOVE REAR SEATBACK LOCK STRIKER COVER LH

(a) Disengage the 2 guides and claw, remove the rear seatback lock striker cover LH.

14. REMOVE REAR SEATBACK LOCK CONTROL LEVER BASE LH

(a) remove the screw.

(b) Disengage the 5 claws and remove the rear seatback lock control lever base LH.

15. REMOVE REAR SEATBACK COVER LH

(a) Disengage the 4 claws and remove the rear seatback cover LH.

16. REMOVE SEPARATE TYPE REAR SEATBACK COVER WITH PAD LH

(a) Using a clip remover, remove the 2 clips.

NOTICE:
The clips must not be reused.

(b) Disengage the fastener.

Text in Illustration

(c) Using a clip remover, disengage the 9 clips.

NOTICE:
The clips must not be reused.

(d) Remove the 9 clips from the separate type rear seatback cover LH.

NOTICE:
The clips must not be reused.

(e) Disengage the 8 hooks.

(f) Disengage the 2 hooks.

(g) Detach the 6 pieces of double-sided tape.

Text in Illustration

(h) Disengage the 4 claws and remove the 2 rear seat headrest supports.

(i) Remove the separate type rear seatback cover with pad from the rear seatback frame sub-assembly LH.

17. REMOVE SEPARATE TYPE REAR SEATBACK COVER LH

(a) Remove the 11 hog rings and the separate type rear seatback cover LH.

18. REMOVE REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY LH

(a) Remove the 2 screws.

(b) Disengage the guide.

(c) Pull out the rod of the rear seatback lock assembly as shown in the illustration, and then remove the rear seat lock control lever LH

19. REMOVE NO. 2 REAR SEATBACK EDGE PROTECTOR

(a) Detach the 4 pieces of double-sided tape and remove the No. 2 rear seatback edge protector.

Text in Illustration

20. REMOVE REAR SEATBACK LOCK ASSEMBLY LH

(a) Remove the 2 bolts and the rear seatback lock assembly LH.