Disassembly

BRAKE (REAR): REAR BRAKE: DISASSEMBLY

1. REMOVE REAR DISC BRAKE PISTON

(a) Using SST, remove the rear disc brake piston by turning it counterclockwise.

SST : 09719-12010

09719-01030





NOTICE:
* Do not damage the piston.
* Do not allow any brake fluid to spatter.

2. REMOVE CYLINDER BOOT

(a) Remove the cylinder boot from the rear disc brake piston.

3. REMOVE PISTON SEAL

(a) Using a screwdriver with its tip wrapped with vinyl tape, remove the piston seal from the rear disc brake cylinder assembly.





Text in Illustration





NOTICE:
Do not damage the inner surface or piston seal groove of the cylinder.

4. REMOVE REAR DISC BRAKE BLEEDER PLUG CAP

5. REMOVE REAR DISC BRAKE BLEEDER PLUG