Road Test

CRUISE CONTROL: CRUISE CONTROL SYSTEM: ROAD TEST

1. PROBLEM SYMPTOM CONFIRMATION

(a) Inspect the SET function.

Text in Illustration









(1) Turn the cruise control switch (ON-OFF button) on.

(2) Check that the cruise control indicator light illuminates on the combination meter assembly.

(3) Drive at a speed of between approximately 40 km/h (25 mph) and 200 km/h (125 mph).

(4) Push the cruise control switch to -/SET.

Text in Illustration









(5) Check that "SET" is displayed on the multi-information display.

(6) After releasing the switch, check that the vehicle cruises at the set speed.

(b) Inspect the + function.

Text in Illustration









(1) Turn the cruise control switch (ON-OFF button) on.

(2) Drive at a speed of between approximately 40 km/h (25 mph) and 200 km/h (125 mph).

(3) Push the cruise control switch to -/SET.

(4) Check that vehicle speed increases while the cruise control switch is pushed to +/RES, and that the vehicle cruises at the newly set speed when the switch is released.

(5) Push the cruise control switch to +/RES and then release it immediately. Check that vehicle speed increases by approximately 1.6 km/h (1 mph) (tap-up control).

(c) Inspect the - function.

Text in Illustration









(1) Turn the cruise control switch (ON-OFF button) on.

(2) Drive at a speed of between approximately 40 km/h (25 mph) and 200 km/h (125 mph).

(3) Push the cruise control switch to -/SET.

(4) Check that vehicle speed decreases while the cruise control switch is pushed to -/SET, and the vehicle cruises at the newly set speed when the switch is released.

(5) Push the cruise control switch to -/SET, and then release it immediately. Check that vehicle speed decreases by approximately 1.6 km/h (1 mph) (tap-down control).

(d) Inspect the CANCEL function.

Text in Illustration









(1) Turn the cruise control switch (ON-OFF button) on.

(2) Drive at a speed of between approximately 40 km/h (25 mph) and 200 km/h (125 mph).

(3) Push the cruise control switch to -/SET.

(4) When performing any one of the following, check that the operation of the cruise control system is cancelled, normal driving resumes and "SET" on the multi-information display goes off.

* Depressing the brake pedal

* Moving the shift lever from D to any other position

* Turning the cruise control switch off

* Pulling the cruise control switch to CANCEL

(e) Inspect the RES function.

Text in Illustration









(1) Turn the cruise control switch (ON-OFF button) on.

(2) Drive at a speed of between approximately 40 km/h (25 mph) and 200 km/h (125 mph).

(3) Push the cruise control switch to -/SET.

(4) Cancel cruise control operation by performing any of the above operations (other than turning the cruise control switch off).

(5) After pushing the cruise control switch to +/RES at a speed of more than approximately 40 km/h (25 mph), check that the vehicle resumes the speed set prior to the cancellation and that "SET" is also displayed on the multi-information display.