Installation

HEATING / AIR CONDITIONING: FRONT BLOWER MOTOR: INSTALLATION

1. INSTALL FRONT BLOWER MOTOR SUB-ASSEMBLY (w/o PTC Heater)

(a) Install the front blower motor sub-assembly with the 3 screws.

NOTICE:
Do not reuse the front blower motor sub-assembly if it has been damaged or received an impacted.

(b) Engage the clamp and connect the connector.

2. INSTALL FRONT BLOWER MOTOR SUB-ASSEMBLY (w/ PTC Heater)

(a) Install the front blower motor sub-assembly with the 3 screws.

NOTICE:
Do not reuse the front blower motor sub-assembly if it has been damaged or received an impacted.

(b) Install the quick heater connector screw.

(c) Reattach the felt tape.

(d) Engage the clamp and connect the connector.

3. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation