Rear Combination Light Assembly

LIGHTING (EXT): REAR COMBINATION LIGHT ASSEMBLY: ON-VEHICLE INSPECTION

1. INSPECT REAR COMBINATION LIGHT ASSEMBLY LH

(a) Disconnect the connector from the rear combination light assembly LH.





(b) Measure the voltage according to the value(s) in the table below.

Standard Voltage:





Text in Illustration





If the result is not as specified, repair or replace the wire harness or connector.

2. INSPECT REAR COMBINATION LIGHT ASSEMBLY RH

(a) Disconnect the connector from the rear combination light assembly RH.





(b) Measure the voltage according to the value(s) in the table below.

Standard Voltage:





Text in Illustration





If the result is not as specified, repair or replace the wire harness or connector.