Installation

2ZR-FXE ENGINE CONTROL: CRANKSHAFT POSITION SENSOR: INSTALLATION

1. INSTALL CRANK POSITION SENSOR

(a) Apply a light coat of engine oil to the O-ring on the crank position sensor.





(b) Install the crank position sensor with the bolt.

Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

Connect the crank position sensor connector.

2. INSPECT FOR OIL LEAK

3. INSTALL NO. 1 ENGINE UNDER COVER

4. INSTALL REAR ENGINE UNDER COVER RH