Removal

2ZR-FXE ENGINE CONTROL: ECM: REMOVAL

1. PRECAUTION

NOTICE:
After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notice before proceeding with work Service Precautions.

2. REMOVE REAR NO. 2 FLOOR BOARD Removal

3. REMOVE REAR DECK FLOOR BOX Removal

4. REMOVE REAR NO. 3 FLOOR BOARD Removal

5. REMOVE DECK FLOOR BOX RH Removal

6. REMOVE REAR FLOOR BOARD UPPER NO. 3 PLATE Removal

7. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

8. REMOVE INVERTER WITH CONVERTER ASSEMBLY

Removal

9. SEPARATE INVERTER RESERVE TANK ASSEMBLY

(a) Remove the 2 bolts and separate the inverter reserve tank assembly.





10. REMOVE ECM

(a) Separate the wire harness clamp.





(b) Disconnect the 2 ECM connectors.

(1) Disconnect the wire harness clamp.





(2) Push the locks on the 2 levers, then raise the levers, and disconnect the 2 ECM connectors.

NOTICE:
After disconnecting the connectors, make sure that dirt, water or other foreign matter does not contact the connecting parts of the connectors.

(c) Remove the 2 bolts and ECM.





(d) Remove the 4 screws and 2 ECM brackets.