"P" Position Switch Circuit

VEHICLE PROXIMITY NOTIFICATION SYSTEM: VEHICLE PROXIMITY NOTIFICATION SYSTEM: "P" Position Switch Circuit
- "P" Position Switch Circuit

DESCRIPTION

The vehicle approaching speaker controller detects when the shift state is park (P). When the vehicle approaching speaker controller detects that the shift state has been changed to park (P) due to the operation of the transmission shift main switch (P position switch), it stops operating the vehicle approaching speaker.

WIRING DIAGRAM





INSPECTION PROCEDURE

NOTICE:
Inspect the fuses for circuits related to this system before performing the following inspection procedure.

PROCEDURE

1. CHECK ELECTRONIC SHIFT LEVER SYSTEM

(a) Check that the transmission shift main switch indicator illuminates when the transmission shift main switch (P position switch) is operated.

OK:

Indicator illuminates in accordance with switch operation

NG -- GO TO ELECTRONIC SHIFT LEVER SYSTEM How To Proceed With Troubleshooting
OK -- Continue to next step.

2. CHECK HARNESS AND CONNECTOR (VEHICLE APPROACHING SPEAKER CONTROLLER - TRANSMISSION SHIFT MAIN SWITCH)

(a) Disconnect the H138 vehicle approaching speaker controller connector.

(b) Disconnect the H81 transmission shift main switch connector.

(c) Measure the resistance according to the value (s) in the table below.

Standard Resistance:





NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR

OK -- PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Symptom Related Diagnostic Procedures