Installation

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: YAW RATE AND ACCELERATION SENSOR: INSTALLATION

1. INSTALL YAW RATE AND ACCELERATION SENSOR

(a) Connect the yaw rate and acceleration sensor connector.

NOTICE:
Make sure that the yaw rate and acceleration sensor connector is connected securely.

(b) Install the yaw rate and acceleration sensor with the 2 bolts.

Torque : 8.5 Nm (87 kgf-cm, 75 in-lbf)

NOTICE:
* Do not damage the yaw rate and acceleration sensor.
* Make sure that the yaw rate and acceleration sensor is installed securely.
* Do not use dropped or damaged parts.
* Keep the contact surfaces of the yaw rate and acceleration sensor and the body free of foreign matter.
* Make sure that the sensor is facing the correct direction.

2. INSTALL NO. 5 DISC PLAYER BRACKET (w/ Navigation System for DVD)

(a) Install the No. 5 disc player bracket with the 4 bolts.





NOTICE:
Tighten the 4 bolts in the order shown in the illustration.

(b) Engage the clamp.

3. INSTALL MULTI-MEDIA MODULE ASSEMBLY (w/ Navigation System for DVD) Installation

4. INSTALL NO. 3 CONSOLE BOX MOUNTING BRACKET (w/ Navigation System for DVD) Installation

5. INSTALL CONSOLE BOX RH (w/ Navigation System for DVD) Installation

6. INSTALL FRONT NO. 2 CONSOLE BOX INSERT (w/ Navigation System for DVD) Installation

7. INSTALL CONSOLE BOX LH Installation

8. INSTALL CONSOLE BOX INSERT Installation

9. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY Installation

10. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY Installation

11. INSTALL REAR CONSOLE BOX ASSEMBLY

Installation

12. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Installation

13. PERFORM YAW RATE AND ACCELERATION SENSOR ZERO POINT CALIBRATION

Calibration