Removal

LIGHTING (EXT): HEIGHT CONTROL SENSOR: REMOVAL

1. PRECAUTION

CAUTION:
After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notice before proceeding with work Service Precautions.

2. REMOVE REAR NO. 2 FLOOR BOARD Removal

3. REMOVE REAR DECK FLOOR BOX Removal

4. REMOVE REAR NO. 3 FLOOR BOARD Removal

5. REMOVE DECK FLOOR BOX RH Removal

6. REMOVE REAR FLOOR BOARD UPPER NO. 3 PLATE Removal

7. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

8. REMOVE REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY

(a) Disengage the clamp.





(b) Disconnect the connector.

Text in Illustration





(c) Remove the 2 bolts.

(d) Disengage the 2 guides and remove the rear height control sensor sub-assembly.

NOTICE:
Do not drop the rear height control sensor sub-assembly. If it is dropped, replace it with a new one.