Installation

POWER OUTLETS (INT): POWER OUTLET SOCKET: INSTALLATION

1. INSTALL POWER OUTLET SOCKET COVER (for Front Side)

(a) Engage the 2 claws to install the power outlet socket cover.

2. INSTALL POWER OUTLET SOCKET ASSEMBLY (for Front Side)

(a) As shown in the illustration, align the protrusion of the power outlet socket assembly and the notch of the power outlet socket cover.





(b) Engage the 2 claws to install the power outlet socket assembly to power outlet socket cover.

3. INSTALL INSTRUMENT PANEL BOX ASSEMBLY (for Front Side)

(a) Connect the connector.

(b) Engage the 2 clamps.

(c) Engage the 2 clips as shown in the illustration.





(d) Install the instrument panel box assembly with the 2 screws.

(e) Engage the 4 guides and 3 claws, and install the instrument panel finish panel end.

(f) Close the instrument panel door.

4. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (for Front Side) Installation

5. INSTALL CENTER INSTRUMENT PANEL REGISTER ASSEMBLY (for Front Side) Installation

6. INSTALL POWER OUTLET SOCKET COVER (for Rear Side)

(a) Engage the 2 claws to install the power outlet socket cover.

7. INSTALL POWER OUTLET SOCKET ASSEMBLY (for Rear Side)

(a) As shown in the illustration, align the protrusion of the power outlet socket assembly and the notch of the power outlet socket cover.





(b) Engage the 2 claws to install the power outlet socket assembly to power outlet socket cover.

8. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY (for Rear Side) Installation

9. INSTALL UPPER NO. 1 CONSOLE PANEL GARNISH (for Rear Side) Installation

10. INSTALL UPPER NO. 2 CONSOLE PANEL GARNISH (for Rear Side) Installation

11. INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL (for Rear Side) Installation