Reassembly

EXTERIOR: REAR BUMPER: REASSEMBLY

1. INSTALL WHEEL HOUSE REINFORCEMENT LH

(a) Install the wheel house reinforcement LH with the nut.





2. INSTALL WHEEL HOUSE REINFORCEMENT RH

3. INSTALL REAR BUMPER SIDE SUPPORT LH

(a) Engage the clip, claw and 4 guides, and install the rear bumper side support LH.





Torque : 2.0 Nm (20 kgf-cm, 18 in-lbf)

(b) Install the 4 screws.

4. INSTALL REAR BUMPER SIDE SUPPORT RH

5. INSTALL REAR BUMPER REINFORCEMENT

(a) Install the rear bumper reinforcement with the 6 nuts.





Torque : 68 Nm (693 kgf-cm, 50 ft-lbf)

6. INSTALL REAR BUMPER ARM LH

(a) Engage the 4 claws and install the rear bumper arm LH.





7. INSTALL REAR BUMPER ARM RH

8. INSTALL REAR BUMPER ENERGY ABSORBER

(a) Install the rear bumper energy absorber.





9. INSTALL REAR BUMPER PLATE

10. INSTALL LUGGAGE ROOM WIRE (w/ Intuitive Parking Assist System)

11. INSTALL NO. 1 ULTRASONIC SENSOR RETAINER (w/ Intuitive Parking Assist System) Installation

12. INSTALL NO. 1 ULTRASONIC SENSOR (w/ Intuitive Parking Assist System) Installation