Installation

EXTERIOR: REAR BUMPER: INSTALLATION

1. INSTALL REAR BUMPER ASSEMBLY (w/o Intuitive Parking Assist System)

(a) Engage each claw.





(b) Install the rear bumper assembly with the 2 clips, 4 screws and 2 bolts.

Bolt - Torque : 5.5 Nm (56 kgf-cm, 49 in-lbf)

Screw - Torque : 2.0 Nm (20 kgf-cm, 18 in-lbf)

(c) Install the 2 rear bumper plates.





2. INSTALL REAR BUMPER ASSEMBLY (w/ Intuitive Parking Assist System)

(a) Install the grommet.





(b) Connect the connector.

(c) Engage each claw.





(d) Install the rear bumper assembly with the 2 clips, 4 screws and 2 bolts.

Bolt - Torque : 5.5 Nm (56 kgf-cm, 49 in-lbf)

Screw - Torque : 2.0 Nm (20 kgf-cm, 18 in-lbf)

(e) Install the 2 rear bumper plates.





3. INSTALL LUGGAGE COMPARTMENT INNER TRIM COVER RH (w/ Intuitive Parking Assist System) Reassembly

4. INSTALL REAR FLOOR FINISH PLATE (w/ Intuitive Parking Assist System) Reassembly

5. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK (w/ Intuitive Parking Assist System) Reassembly

6. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY (w/ Intuitive Parking Assist System) Reassembly

7. INSTALL SPARE WHEEL COVER TRAY (w/ Intuitive Parking Assist System)

8. INSTALL LUGGAGE COMPARTMENT FLOOR MAT (w/ Intuitive Parking Assist System)