Disassembly

INSTRUMENT PANEL: INSTRUMENT PANEL SAFETY PAD: DISASSEMBLY

1. REMOVE SIDE NO. 1 DEFROSTER NOZZLE DUCT

(a) Remove the 2 screws [F] and the side No. 1 defroster nozzle duct.





2. REMOVE SIDE NO. 2 DEFROSTER NOZZLE DUCT

(a) Remove the 2 screws [F] and the side No. 2 defroster nozzle duct.





3. REMOVE DEFROSTER NOZZLE ASSEMBLY

(a) Remove the 3 screws [F] and the defroster nozzle assembly.





4. REMOVE NO. 1 HEATER TO REGISTER DUCT

(a) Remove the 3 screws [F] and the No. 1 heater to register duct.





5. REMOVE NO. 2 HEATER TO REGISTER DUCT

(a) Remove the 4 screws [F] and the No. 2 heater to register duct.





6. REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY Removal

7. REMOVE NO. 3 INSTRUMENT PANEL WIRE

(a) Disconnect the connector.





(b) Disengage the 3 clamps and remove the No. 3 instrument panel wire.

8. REMOVE NAVIGATION ANTENNA ASSEMBLY Removal

9. REMOVE AUTOMATIC LIGHT CONTROL SENSOR

(a) Disengage the 2 claws and remove the automatic light control sensor.





10. REMOVE NO. 1 METER HOOD RETAINER

(a) Remove the 2 screws [I] and the 2 No. 1 meter hood retainer.





11. REMOVE FRONT PASSENGER AIRBAG ASSEMBLY Removal

12. REMOVE NO. 1 INSTRUMENT PANEL PIN

(a) Remove the 4 screws [I] and the 4 No. 1 instrument panel pins.





13. REMOVE NO. 1 DEFROSTER NOZZLE GARNISH

(a) Disengage the 3 claws [A].





(b) Disengage the 3 claws [B] and remove the No. 1 defroster nozzle garnish as shown in the illustration.

14. REMOVE NO. 2 DEFROSTER NOZZLE GARNISH

(a) Disengage the 3 claws [A].





(b) Disengage the 3 claws [B] and remove the No. 2 defroster nozzle garnish as shown in the illustration.