Removal

SLIDING ROOF: SLIDING ROOF HOUSING (for Standard): REMOVAL

1. REMOVE ROOF HEADLINING ASSEMBLY

Removal

2. REMOVE CURTAIN SHIELD AIRBAG ASSEMBLY LH Removal

3. REMOVE CURTAIN SHIELD AIRBAG ASSEMBLY RH

HINT
Use the same procedure for the RH side and LH side.

4. REMOVE SLIDING ROOF SIDE GARNISH LH

(a) Disengage the 5 claws and remove the sliding roof side garnish LH.





5. REMOVE SLIDING ROOF SIDE GARNISH RH

HINT
Use the same procedure for the RH side and LH side.

6. REMOVE SLIDING ROOF GLASS SUB-ASSEMBLY

(a) Using a T25 "TORX" driver, remove the 4 screws and sliding roof glass sub-assembly.

NOTICE:
To prevent the sliding roof glass and sliding roof drive gear from being displaced, fully close the sliding roof glass (sliding roof drive cable), and then remove the sliding roof glass.





7. REMOVE SLIDING ROOF HOUSING SUB-ASSEMBLY

(a) Disconnect the 4 sliding roof drain hoses.

(b) Remove the 8 bolts, 8 nuts, and sliding roof housing sub-assembly.





8. REMOVE SLIDING ROOF WEATHERSTRIP

(a) Remove the sliding roof weatherstrip from the sliding roof glass sub-assembly.