Pinout Values and Diagnostic Parameters

BRAKE CONTROL: VEHICLE STABILITY CONTROL SYSTEM: TERMINALS OF ECU

1. Terminal of ECU





Text in Illustration









(*1): w/ Dynamic Radar Cruise Control System

(*2): w/ VSC OFF Switch

2. Terminal Inspection

(a) Disconnect the connector and measure the voltage or resistance on the wire harness side.





Text in Illustration





HINT
Voltage cannot be measured with the connector connected to the skid control ECU because the connector is watertight.

Standard:





(*1): w/ Dynamic Radar Cruise Control System

(*2): w/o Dynamic Radar Cruise Control System

(*3): w/ VSC OFF Switch