Data List / Active Test

BRAKE CONTROL: VEHICLE STABILITY CONTROL SYSTEM: DATA LIST / ACTIVE TEST

1. DATA LIST

HINT
With Techstream connected to the DLC3 and the engine switch on (IG), the ABS, TRAC and VSC Data List can be displayed. Follow the prompts on the tester screen to access the Data List.

ABS/VSC/TRAC

















(*1): w/ Dynamic Radar Cruise Control System

(*2): w/ Pre-collision System

2. ACTIVE TEST

HINT
Performing the Active Test using Techstream allows the relay, actuator, and other items to operate without removing any parts. Performing the Active Test as the first step in troubleshooting is one of the methods to save labor time.

It is possible to display the Data List during the Active Test.

(a) Connect Techstream to the DLC3.

(b) Turn the engine switch on (IG).

(c) On the tester display, select the Active Test.

HINT
The engine switch must be turned on (IG) to proceed to the Active Test using Techstream.

ABS/VSC/TRAC





(*1): w/ Dynamic Radar Cruise Control System