Reading and Clearing Diagnostic Trouble Codes

METER: METER / GAUGE SYSTEM: DTC CHECK / CLEAR

1. CHECK DTC

(a) Connect Techstream to the DLC3.

(b) Engine switch on (IG) and turn the tester on.

(c) Enter the following menus: Body Electrical / Trouble Codes.

(d) Check for DTCs.

2. CLEAR DTC

(a) Connect Techstream to the DLC3.

(b) Engine switch on (IG) and turn the tester on.

(c) Enter the following menus: Body Electrical / Combination Meter / Trouble Codes.

(d) Clear the DTCs.